CEMENT BASED GROUTING
GC WATER RETENTION GROUT IS HIGH POLYMER-MODIFIED WATER RESISTANT, CEMENT BASED GROUT FOR INTERIOR & EXTERIOR, FLOOR & WALL JOINTS OF WIDTH. THIS GROUT DESIGNED FOR GROUTING GLAZED WALL TILES, PORCELAIN TILES, MOSAIC, VITRIFIED & FULLY VITRIFIED TILES, NATURAL AND ENGINEERED STONE JOINTS OF WIDTH 1MM – 3 MM
AVAILABLE COLORS: White , Ivory , Black , Grey , Teracota , Blue , Brown
Suitable Substrates
Concrete
Durable and strong, providing a solid foundation for a wide range of applications.
Cement Plaster
Ensures a smooth, even surface ideal for coatings and tile installations.
Concrete Masonry
Reliable and robust, offering structural integrity with versatile finishing options.
Cement Mortar Beds
Provides a stable, level base ensuring proper support and adhesion for coverings.
Application & Usage Guidelines
Area of Applications
- Floor and walls
- Internal & external area
- Domestic applications
- Commercial applications
- Heavily trafficked floors
- Movement / vibration areas
- Swimming pools
Precautions
- Always apply on completely dry tile joints.
- Do not apply on wet or damp tile joints.
- Do not add too much water to the grout.
- Always mix grout in a clean pot.
- Do not add a different colour to the grout.
- While cleaning, frequently change the water.
- Change cleaning cloth/sponge when they are impregnated with grout.
- Do not allow water to flow or run into un-grouted joints during application.
- Allow foot traffic on applied area only after 24 hours.
- Do not use acid to clean joints. Use GC Tile Cleaner for cleaning purpose.
Application Instructions
- Always fill grout after 24 hours of tile installation.
- Ensure there is no dust or debris between the tile joints while grouting.
- Fill the grout at least 3 mm deep.
- Before filling the grout, make sure there is no moisture between the tiles.
- Use masking tape if the tiles or stones are very rough.
How to Mixing
- Take pre-measured water in a clean mixing vessel.
- Add CEMENT POLYMER GROUT to the water and mix until a lump-free, smooth paste of uniform colour is obtained.
- Allow the mix to slake for 2–5 minutes, then remix.
- Do not reconstitute the mixed grout by adding more water, as this will reduce the final strength.
- Do not add excess water.
- Use the paste within 40–50 minutes from mixing time.
Note: Information is provided in good faith based on R&D data. The company reserves the right to update this information at any time without prior notice.