Area of Applications

• Floor and walls.
• Internal & external area.
• Domestic applications.
• Commercial applications with wider tile joints up to 6 mm.
• Ceramic tile, vitreous, semi-vitreous tile, glass mosaic tiles, terrazzo, brick, marble, natural stone and agglomerate stone installation.

Precautions

• Do not apply on wet/damp tile joints. Always apply on completely dry tile joints.
• Do not over-mix the material. Over-mixing can reduce the pot life.
• Do not allow grout to harden on the face of the tile. Clean promptly.
• While cleaning, change the water frequently. Change cleaning cloth/sponge when they are impregnated with grout.
• Do not allow water to flow/run into un-grouted joints while application.
• Protect from direct rainfall/foot traffic for at least 24 hours.
• In case of grouting natural stones, it is necessary to execute a preliminary test, in order to verify the absorption of colour by the stone slabs. To avoid this problem, mask the tiles before grouting. A sealer or grout release may be required.

Application Instructions

• Ensure 24 hours time interval for grouting after tile fixing.
• The joints must be dry, clean, free of dust & adhesive.
• Emptied at least 2/3 of the tile thickness depth.
• Before grouting, make sure that the adhesive has set and released most of its moisture.
• The joints should not be wet during work.
• Put masking tape by the side of the grouting space or sealer if necessary.

How to Mixing

• Add GC Grout to GC Grout Admixed proper amount and mix it with a slow speed mixer or by hand thoroughly.
• Avoid entraining air by mixing at very high speed or by over-mixing.
• Dampen tile surface with water. Spread with a sharp, firm rubber grout float.
• Make sure that uniform colour & lumps-free consistency is achieved.
• Use the paste within 60 minutes from mixing.

Note: The information supplied in this datasheet is based upon extensive experience and is given in good faith in order to help you. Our Company policy is one of continuous Research and Development we therefore reserve the right to update this information at any time without prior notice. We also guarantee the consistent high quality of our products however as we have no control over site conditions or the execution of the work, we accept no liability for any loss or damage which may arise as a result thereof.